MITCalc version 1.61
Decin, Czech Republic,
08/31/2012
Engineering calculations MITCalc - modifications into version 1.61
- Signature of VBA sections with a new certificate valid until 2014
(Importance - high)
- Planetary gear, correction of the size through the ring gear W (Importance
- medium)
- Spur gearing internal/external toothing, bevel gearing, planetary gear,
correction of the virtual number of teeth zn (Importance - low)
- Bolt joint, correction of coefficient for additional stress due to bending
d (Importance - medium)
Correction of problems connected with correct initialization of the
calculations' input table data when using certain combo boxes in MS Office
2010 for:
- Pins and clevis pins couplings: setup of the correct list of allowed
diameters and lengths of pins when changing the type of pins [1.10]
(Importance - low)
- Force couplings of shafts with hubs: setup of initial material
characteristics if the calculation units are changed [1.1] (Importance -
low)
- Compression, tension and torsion springs: setup of a correct list of
allowed wire diameters if the material norm of the wire is changed
(Importance - low)
- Compression, tension and torsion springs: problem with displaying the
results table [3.20] of the spring's design calculation (Importance -
medium)
New versions of MITCalc are available for download
here.
About MITCalc
MITCalc is a multi-language mechanical and technical calculation package.
It includes solutions for gears, belt and chain drives, bearings, springs, beam, shaft,
bolt connection, shaft connection, tolerances, welding and many other mechanical parts. The
calculations are compatible with most types of 2D and 3D CAD systems (AutoCAD®, AutoCAD LT®, IntelliCAD®, Ashlar Graphite®, TurboCAD®, Autodesk Inventor®,
SolidWorks®, Solid Edge®, Pro/ENGINEER®...) , support both Imperial and Metric units, and are
processed according to ANSI, ISO, DIN, BS, Japanese and other common
standards.
Go to Main Page
© Copyright
2003-2020, All rights
reserved.
|