MITCalc version 1.51
Decin, Czech Republic,
01/10/2010
Engineering calculations MITCalc - modifications into version 1.51
- Integration of Extension
Pack EP07 (Plates)
-
Integration of Service Pack SP06
-
Extended installation options with administrator rights (it is possible to
install in the account with administrator rights and start up in all
accounts with user rights)
-
An example of transmission calculations is available in help (gearing,
shafts, bearings, belts, chains...)
-
Added support for AutoCAD versions 2010 and 2011
Furthermore, the below described problems have been solved:
- Calculation of forces and
bending moment for spur gear (external, internal, planetary). Everything is
newly calculated on
an operating pitch diameter. Refinement is related to Ft, Fr and
Mo in paragraph [12.0] (Importance - low)
-
Refinement of Conversion of Units
(Importance - medium)
-
Refinement of image switching in the calculation of plates and in the module
of technical formulas in Office 2007/SP1.
(Importance - medium)
-
Refinement of Calculation of Plates - the calculation of rectangular plate,
paragraph [4], cases 2 and 9 – wrong recalculation of force.
(Importance - high)
-
Refinement of the calculation of width between centres (planet/crown wheel)
for non-zero backlash in planetary gearing.
(Importance - high)
-
Refinement of the interface for SolidEdge ST2.
(Importance - high)
-
Beams, extended range of input cells (dimensions, load...), added IPE
Profile. (Importance - low)
-
V-belts (SI version): corrected pulley slot angle (SPZ, SPA, SPB, SPC) for
selected diameters. (Importance - low)
-
Internal gearing ANSI, refinement of the conditioned formatting for bending
safety coefficient. (Importance - low)
New versions of MITCalc are available for download
here.
About MITCalc
MITCalc is a multi-language mechanical and technical calculation package.
It includes solutions for gears, belt and chain drives, bearings, springs, beam, shaft,
bolt connection, shaft connection, tolerances, welding and many other mechanical parts. The
calculations are compatible with most types of 2D and 3D CAD systems (AutoCAD®, AutoCAD LT®, IntelliCAD®, Ashlar Graphite®, TurboCAD®, Autodesk Inventor®,
SolidWorks®, Solid Edge®, Pro/ENGINEER®...) , support both Imperial and Metric units, and are
processed according to ANSI, ISO, DIN, BS, Japanese and other common
standards.
Go to Main Page
© Copyright
2003-2020, All rights
reserved.
|