MITCalc  Mechanical, Industrial and Technical Calculations

Your day-to-day partner on the way to an excellent product.   


MITCalc for Solid Edge, Pinned Couplings (EP05)

Decin, Czech Republic, 20.09.2005


MITCalc engineering calculations have been extended with a new module and connected to the Solid Edge CAD system.


MITCalc for Solid Edge

It is a standalone installation. In addition to “MITCalc” calculations, it includes the appropriate parametric models and an interface between Excel and the Solid Edge CAD system (ver. 15, 16, 17). In addition to individual parts, the link of MITCalc for Solid Edge and the Solid Edge CAD system makes it possible to also input groups of parts (subassembly) into assembly. For example, it is possible to input a complete belt gear solution at once; it is fully associative and the dimensions of the inserted part (subassembly) change according to the changes in calculation parameters.


Pinned Couplings (Extension Pack EP05)

The calculation is intended for the geometric design and strength check of couplings using pins and clevis pins. The program is used to solve the following tasks: design of pin for spring attachment, design of couplings with securing pins, design of cross pin in rod and sleeve, design of radial pin for shaft-hub connection, design of longitudinal pin for shaft-hub connection, design of clevis pin for rotating rod-clevis connection, strength check of designed couplings. The program includes dimensional tables for pins and clevis pins according to ANSI, ISO, DIN, BS, JIS and CSN and support of 2D CAD systems.


Extension pack EP05 and MITCalc for Solid Edge is available for download here.


About MITCalc

MITCalc is a multi-language mechanical and technical calculation package. It includes solutions for gear, belt and chain drives, bearings, springs, bearings, beam, shaft, bolt connection, shaft connection, tolerances and many other mechanical parts. The calculations are compatible with most types of 2D and 3D CAD systems (AutoCAD®, AutoCAD LT®, IntelliCAD®, Ashlar Graphite®, TurboCAD®, Autodesk Inventor®, SolidWorks®, Solid Edge®, Pro/ENGINEER®...) , support both Imperial and Metric units, and are processed according to ANSI, ISO, DIN, BS, Japanese and other common standards.

Go to Main Page

© Copyright 2005, All rights reserved.